User manual

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing displays
111Displaying ICLID Information
6
Before you start
Be sure Analog Trunk Incoming Call ID field is set to
y on the System-Parameters
Customer-Options screen.
Refer to the DEFINITY ECS System Description for information on the required
circuit pack.
Instructions
Let’s set up the analog diod trunk group 1 to receive calling party information and
display the calling party number on the phone of the person called.
1. Type
change trunk group 1.
The Trunk Group
screen for trunk group 1 appears. The Group Type field is
already set to diod.
2. Press
NEXT PAGE to display the Trunk Features page.
3. Type
Bellcore in the Receive Analog Incoming Call ID field.
4. Press
NEXT PAGE to display the Administrable Timers section.
5. Type
120 in the Incoming Seizure (msec) field.
6. Press
ENTER to save your changes.
change trunk-group 1 Page 2 of x
TRUNK GROUP
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? n
Receive Analog Incoming Call ID: Bellcore
Incoming Tone (DTMF) ANI: no
change trunk-group 1 Page 3 of x
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500
Incoming Dial Guard(msec): 70
Incoming Seizure(msec): 120
Flash Length(msec): 540 Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone (msec): 350 Pause (msec): 150