User manual

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
817Modem Pool Group
17
Modem Pool Group
There are two types of conversion resources for Modem Pooling. The first type, an
integrated conversion resource, is a circuit pack that emulates a Trunk Data
Module connected to a 212A-type modem. Two conversion resources are on each
circuit pack.
The second type, a combined conversion resource, is a separate Trunk Data
Module and modem administered as a unit. The Trunk Data Module component of
the conversion resource may be either a Modular Trunk Data Module (MTDM) or
7400A Data Module and connects to a digital port using Digital Communications
Protocol (DCP); the modem connects to an analog port.
Field descriptions for page 1
Screen 162. Modem Pool Group — Integrated screen if Group Type is integrated
change modem-pool num Page 1 of 1
MODEM POOL GROUP
Group Number: 1 Group Type: integrated
Receiver Responds to Remote Loop? n Hold Time (min): 5
Send Space Disconnect? y Receive Space Disconnect? y
CF-CB Common? y Loss of Carrier Disconnect? y
Speed: LOW/300/1200 Duplex: full Synchronization: a/sync
CIRCUIT PACK ASSIGNMENTS
Circuit Pack Circuit Pack
Location Location
1: ___ 9: ___
2: ___ 10: ___
3: ___ 11: ___
4: ___ 12: ___
5: ___ 13: ___
6: ___ 14: ___
7: ___ 15: ___
8: ___ 16: ___