User manual

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
875Security-Related System Parameters
17
Identification
Number of Digits
This field tells the system how many digits to collect if the first and second digits
match. Enter the length of the dialed number.
Security-Related System Parameters
You use this screen to determine when the switch reports a security violation.
Many of the fields on this screen repeat for each type of security violation. We
have explained them once here, but the usage is the same for all. Refer to
‘‘Security violations notification’’ on page 1479
for more information on security
violations notification.
Valid entries Usage
attd
Enter an abbreviation to identify the dialed number when a
second digit is dialed. See the first digit table information, in
‘‘
Dial Plan Record’’ on page 593, for an explanation of these
entries.
extension
tac
fac
ars
aar
Valid entries Usage
2
For attd
2 through 5 For aar, ars, and extension
2 through 4 For tac (2 and 3 with DCS)
2 through 4 For fac