User manual

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
957Terminal Parameters
17
Display Mode
Determines how the #) and ~ characters appear on the 603 phone’s display.This
field only appears if Customize Parameters is
y.
DLI Voltage Level
Determines whether DCP Line Voltage used by the telephones is forced high,
forced low, or allowed to automatically adjust. This field only appears if
Customize Parameters is
y.
Handset Expander Enabled
Determines whether the telephone will reduce noise on the handset. This field
appears only if Customize Parameters is
y.
Primary levels
The following fields only appear if Customize Parameters is set to
y. In each case,
if the field is blank, the system uses the default setting from the Default Parameter
Set. Also, these fields all require the same input; valid entries are from
-44.0 db
through
+14.0 db in 0.5 increments (for example, -44.0, -43.5, -43.0 and son on).
Volume
Voice Transmit (dB)
Determines the volume of voice outbound from the telephone.
Voice Receive (dB)
Determines the volume of voice inbound to the telephone.
Valid entries Usage
1
If this field is set to 1, the # and ~ do not change.
2
If this field is set to 2, the 603 phone displays a # as a British
pound sterling symbol and a ~ as a straight overbar.
Valid entries Usage
y
If the field is y, the telephone reduces background noise.
Valid entries Usage