User manual

Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 93
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
Copy tftp stack-config Command
Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration, via
TFTP.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
Example:
Cajun_P330-N# copy tftp stack-config c:\p332mf\switch1.cfg
192.168.49.10
Copy tftp module-config Command
Use the copy tftp module-config command to download the module-level
configuration from a saved file into the current NVRAM running configuration of a
module, via TFTP.
The syntax for this command is:
copy tftp module-config <filename> <ip> <mod_num>
Example:
Cajun_P330-N# copy tftp startup-config c:\p332mf\switch1.cfg
192.168.49.10 5
filename
file name (full path)
ip The ip address of the host
filename File name (full path)
ip The ip address of the TFTP host