User manual

114 Cajun P332MF User’s Guide
ATM Expansion Sub-modules
There are three Cajun P330 ATM Expansion Sub-modules:
• X330-OC12F1: 500m, Multimode fiber, can also be OC-3 reduced range
• X330-OC12S1: 15 km, Single-mode fiber, can also be OC-3
• X330-OC3F1: 2 km, Multimode fiber (future version).
The ATM sub-modules can be installed in the following Cajun P330 Family
switches:
• Cajun P333T Hardware Version C/S 1.3 and higher, with Embedded S/W 2.4
and higher.
Note: The ATM Expansion Sub-module cannot be used in Cajun P333T hardware
Versions lower than C/S 1.3.
• Cajun P334T Embedded S/W Ver. 2.4 and higher.
• Cajun P332MF Embedded S/W Ver. 3.0 and higher.
• Cajun P333R Embedded S/W Ver. 2.4 and higher.
Refer to the Cajun X330 ATM Access Module User’s Guide for installation
procedures.
The multimode Cajun X330-OC12F1 and X330-OC3F1 (future) ATM sub-modules
are Class 1 LED products. The single-mode X330-OC12S1 ATM sub-module is a
Class 1 Laser product. They comply with EN 60825-1 and Food and Drug
Administration (FDA) 21 CFR 1040.10 and 1040.11.
The sub-modules must be operated under recommended operating conditions.
Safety Information
Single-mode Module Laser Classification
Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
Caution: The use of optical instruments with this product will increase eye hazard.
CLASS 1
LASER PRODUCT