User manual

Chapter 6 Cajun Campus CLI – Layer 2
62 Cajun P332MF User’s Guide
Privileged Level Commands
Following is a table of the Privileged Level commands. This level includes all the
commands from the User Level described above (see the User Level Commands
Section for a description of these common commands).
• no hostname Return the prompt to its default Page 63
• no rmon history Deletes an existing history entry Page 63
• no rmon alarm Deletes an existing alarm entry Page 63
• no rmon event Deletes an existing event entry Page 63
• hostname Displays or sets a new prompt Page 64
• clear
1
Clears current settings (group of
commands)
Page 64
• set
2
Set the module parameters (group of
commands)
Page 67
• sync time Synchronizes the time between modules Page 85
• get time Gets the time from the time server Page 88
• reset Restarts the system or a module Page 88
• nvram
initialize
Initialize the NVRAM to its factory defaults Page 89
• configure Currently not used in the Layer 2 CLI. Page 89
• tech Enter Technician level – Lucent personnel
only
–
• rmon history Creates a history entry Page 89
• rmon alarm Creates an alarm entry Page 90
• rmon event Creates an event entry Page 91
• copy stack-
config tftp
Upload stack configuration to a file (using
tftp). The file must exist before you Upload.
Page 91
• copy module-
config tftp
Upload module configuration to a file (using
tftp). The file must exist before you Upload.
Page 92
• copy tftp
stack-config
Download a stack configuration file (using
TFTP) into the device
Page 93