User manual

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
General Feature Use and Telephone Programming
Page D-14Telephone Programming
D
Table D–4. Programming MLX Telephones Using the Display
Step Action
1 Label the button to be
programmed.
Note: Skip this step if the feature
will not be programmed onto a
button.
Remove the clear label cover from the telephone by
pulling up on the tab that extends from the top of the
cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
2 Begin programming. Press Menu.
Select
from the display.
Select
from the display.
3 Identify the button to be
programmed.
To delete the features currently
programmed on the button:
To display features:
Press the button you labeled.
Note: If the feature does not get programmed onto a
button, press any line button. This does not affect
the button in any way.
The display identifies the feature currently
programmed on the button. If no feature is
programmed, the display indicates that the button is
blank.
Select from the display. The button is now
blank.
Press the button you labeled again to continue
programming.
Note: If the currently programmed feature was not
deleted from the button, the new feature
programmed onto it will replace it.
Select
from the display.
The screen lists feature names in alphabetical order.
Continued on next page