User manual

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-17Accessing SPM
2
Set up the appropriate physical connections between the PC and the control
unit.
See “Connecting the PC” on page 13.
If you installed SPM on the hard disk of the PC, go to Step 5.
If the PC does not have a hard disk, insert the SPM diskette into Drive A.
Type
and press .
appears on the screen.
Type spm and press to display the SPM Welcome screen shown below.
Press any key to display the SPM Main Menu shown below.
NOTE:
The function keys shown on either side of the display are included
here for quick reference. See “SPM Screens” on page 2–21
for
details on using the PC keys in SPM.
■ If the SPM Main Menu does not appear or if the information on the screen
is garbled, press any key again.
■ If the COM Port (communications port) screen appears instead of the SPM
Main Menu, it indicates that the SPM software has not been initialized. See
“Initializing the SPM Software” on page 9.
To select an option, press the function key that corresponds to the option you
want. For example, to select
press .
X.XX current version of SPM