User manual

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-54System Programming
2
Forced Idle Reminder Tone 2
The forced idle reminder tone is a high-low “door-phone” tone400 ms of 667 Hz
tone followed by 400 ms of 571 Hz tone. The tone is provided under the following
circumstances:
■ At the extension, to remind the user that the system or the extension is in
the forced idle state
■ At the programming console or at a PC running SPM, to remind the system
manager that the system (or at least one extension) is in the forced idle
state because of administrative activity
In Release 1.1 and higher of the communications system, forced idle reminder
tones occur every 20 seconds. You can adjust the volume of these tones with the
volume control on the system console.
Accessing System Programming 2
Follow the steps below to access system programming.
At the SPM Main Menu press to select
.
Press the function key next to the option you want.
If the option you want does not appear on the first screen of the System Programming
menu, press to display the second screen of the menu.