User manual

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-32Optional Operator Features
3
Optional Operator Features 3
The procedures in this section affect feature programming for both DLC and QCC
operator positions and include the following:
■ Operator Hold Timer
■ DLC Operator Automatic Hold
QCC operator features are covered in the next section.
Operator Hold Timer 3
Use this procedure to set the length of the operator hold timer for all DLCs and
QCCs. If the system operator does not pick up the call within the time
programmed, an abbreviated ring reminds the operator that a call is being held.
This option cannot be programmed for individual operator positions.
Summary: Operator Hold Timer 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 6a, Optional Operator Features
Factory Setting 60 seconds
Valid Entries 10 to 255 seconds
Inspect No
Copy Option No
Console Procedure
→ →Drop→Dial no. of seconds→
→
PC Procedure → →
+
→Type no. of seconds→ →