CASTLES TECHNOLOGY VEGA3000 P3 POS Terminal Book 2 User Manual V3P3 Confidential Version 1.2 MAY. 2022 CRT-V3-11-02-CE_FCC_UL_WEEE-V1.2 Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Castles Technology Co., Ltd.
Revision History Version Date Descriptions Author 1.0 2022.03.14 Initial creation. Dustin 1.1 2022.03.24 Modify model name Dustin Modify model nick name 1.2 2022.05.18 Modify Page 7 Rear View description Dustin Add VCCI Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
Contents 1. Introduction .................................................................................................................... 5 2. Hardware Setup.............................................................................................................. 6 3. 2.1. Parts of the Terminal.............................................................................................. 6 2.2. Inserting the SAM Card ............................................................................
1. Introduction This document provides a guideline on operating and configuring Castles VEGA3000 terminal. The scope of this document includes setting up the terminal, basic operation, application life cycle, and some advance features. Regulatory instruction of usage ● Before using the terminal, please check has it been disassembled, modified, or showed abnormal situation. If yes, please do not use. ● Please stay away from strong electromagnetic waves.
2. Hardware Setup 2.1. Parts of the Terminal Front view 1 5 4 2 3 1. LCD Display 4. Magnetic Stripe Reader 2. Keypad 5. Stylus 3. Smart Card Reader Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
Rear view 9 10 8 7 6 Side view Top view 11 6. SAM Card Slots 1&2 9. Cable remove hole 7. SAM Card Slots 3&4 10. Product Label 8. SAM Card Slots 5&6 11. RJ50 to DB9/RJ45/Micro USB WARNING DO NOT unplug the RJ50 cable directly. If user will remove the cable, please insert a paper clip into the cable remove hole behind the terminal first. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.2. Inserting the SAM Card Step 1: Remove battery cover / back cover Step 2: Insert SAM card into desire slot. SAM 1 - 6 Gold contact at upper side of card and facing down. Step 3: Reverse the operation of step 1 to install the cover. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
3. Appendix 3.1. FCC Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3.2. UL / IEC 62368-1 Warning: Power cord shall be connected to a socket-outlet with earthing connection. Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations. Warning: This product is intended to be supplied by a Listed Power Adapter "L.P.S." (Or "Limited Power Source") and is rated at 5 Vdc, 2 A min., Tma = 40 degrees C.
