Use and Care Manual

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

STEP 6

With two to four people, lift the bed by

the metal frame and turn it over so the

mattress side is facing up. Take caution

not to lift the bed with the fabric, or to use

the legs as pivot points. This pressure may

cause damage. Avoid dragging the base

across the oor.

STEP 8

Slide the mattress retaining bar into the

anchors located at the foot of the base.

Assembly, continued

STEP 9

Plug the power cord into the wall outlet

and refer to pages 12-15 to test all the

functionality of the remote.

The Zero-Clearance design of this base allows it to be used without legs, making

it compatible with platform frames, box-springs, and decorative beds.

ADDITIONAL STEPS AND INFORMATION

When using two separate Twin XL

adjustable bases, prevent separation

by wrapping a security strap around

the center head and foot legs.

Remove the adhesive backer from the

anti skid pads and apply the anti skid

pads on the frame. Place evenly on

both sides of the frame.

STEP 7

Ensure three AAA batteries (included) are

installed correctly in the remote.