PREMIUM ADJUSTABLE BASE info@lucidmattress.com 888-975-8243 OWNER’S MANUAL PREMIUM ADJUSTABLE BASE SERIAL NO.
PREMIUM ADJUSTABLE BASE CONTENTS Safety & Warranty Warnings 04 Overview & Parts List 06 Assembly 08 Remote Control & Pairing 12 Synchronizing Two Bases 16 Emergency Power Down 17 Connecting with Bluetooth 17 Troubleshooting 18 Warranty 19
Safety & Warranty Warnings IMPORTANT: PLEASE READ ALL INFORMATION CAREFULLY BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS. WEIGHT LIMITS FCC COMPLIANCE • • Operates on 2.4 GHz frequency transmitter • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Overview & Parts List REMOTE MATTRESS RETAINER BAR GET TO KNOW YOUR ADJUSTABLE BASE Before beginning assembly of your adjustable base, please take a moment to familiarize yourself with the parts and location of components, as explained here. If any parts or components are missing, or are different than shown in the adjacent image, do not attempt to complete the assembly process and contact customer support by calling 888-975-8243 or emailing info@lucidmattress.com.
Assembly NOTES 1. Two people are required to assemble this adjustable base. STEP 3 2. 3. Open the carton in a flat position, bottom facing up, to avoid damage. Cut all orange and white zip ties. Do not remove any of the black zip ties. STEP 1 Remove folded bed base from the box and carefully unfold the base. Set it mattress side down on the floor. i 08 OWNER'S MANUAL Install legs by threading the bolt of each leg into the frame and tightening by hand.
Assembly, continued STEP 6 With two to four people, lift the bed by the metal frame and turn it over so the mattress side is facing up. Take caution not to lift the bed with the fabric, or to use the legs as pivot points. This pressure may cause damage. Avoid dragging the base across the floor. STEP 9 Plug the power cord into the wall outlet and refer to pages 12-15 to test all the functionality of the remote.
Remote Control OVERVIEW All of the functions of the bed, explained here, can be operated with the remote control. This remote requires three AAA batteries (included) inserted in the back panel. PRESET BUTTONS Zero Gravity (ZG): Elevate the legs slightly higher than the chest, allowing blood to flow back to the heart to help reduce stress and fatigue. Anti-Snore: Raise the head to allow for easier air intake. TV: Raise the head to the ideal position for watching TV.
Remote Control, continued Remote Control Pairing PAIR (see page 15) OVERVIEW ZERO-GRAVITY TV ANTI-SNORE READ The original remote that comes in the box is already paired to the base. No further action is required.
Synchronizing Two Bases (Twin XL Only) Emergency Power Down TO PAIR ONE REMOTE TO TWO BASES: INSTALLING BATTERIES Batteries act as a backup power source in case of a power failure while the head and/ or foot sections are raised. Locate and remove the cover on the 9V battery compartment in the power supply unit. Install two alkaline 9V batteries (not included) and replace the cover. STEP 1 Place two Twin XL or split size adjustable bases next to each other in desired location.
Troubleshooting Warranty Information PROBLEM POSSIBLE SOLUTION 10-YEAR LIMITED WARRANTY No features of the base will activate. Ensure the remote is paired correctly with the base (see page 15). WHAT IS COVERED Unplug the power cord, wait 30 seconds and plug back in to reset electric components. This warranty covers any defects in materials or workmanship under the conditions and exceptions stated below. Head or foot section will elevate, but will not return to the flat position.
Notes To assist with warranty claims, please keep your receipt and record the following: DATE OF PURCHASE PLACE OF PURCHASE LOT # (found on ID Tag) PO # (found on shipping box label) SERIAL # (found on back cover of this manual) ADDITIONAL NOTES 20 OWNER'S MANUAL
