Installation Guide

8 | Product Information
Part 2. CARE & MAINTENANCE GUIDE
This is a comprehensive maintenance guide
for MaxCore ooring products from LUCIDA
SURFACES. Following this guide is mandatory
in order to validate your Exclusive Warranty
by LUCIDA SURFACES in both residential and
commercial applications. Contact LUCIDA
SURFACES regarding any questions or
concerns you may have.
BEFORE & AFTER INSTALLATION
LUCIDA SURFACES flooring products were
intelligently designed and manufactured to
provide robust and low maintenance flooring
systems for both residential and commercial
applications. Following this guide is mandatory
to validate the Exclusive Warranty and to
guarantee a satisfactory experience.
• Before and after installation, ensure that your
flooring remains within the specified suitable
environmental conditions outlined in the
installation guide for your product.
• For installations using adhesive wait 5 days
before using a wet mop to clean your floors
to allow the adhesive to fully bond to the sub
floor and flooring.
• Immediately after installation, use a damp
cloth to wipe up any excessive adhesive
before it is allowed to cure. Adhesive that has
dried can be removed using a plastic scraper;
do not use sharp or metallic scrapers.
• After installation, dry mop or vacuum the
installation area to remove debris and dirt.
• Make sure that the floors are adequately
protected during installation if other trades
are working within the environment. Damage
caused by workers within the installation area
is not covered under warranty.
• It is recommended for residential, and
mandatory for commercial applications that a
protective floor matting is used in entrances.
Do not use rubber backed matting as it is
known to discolor all-wear layers and is not
covered under warranty.
• Immediately wipe off chemicals that can
discolor and damage the flooring.