Installation Guide
Product Information | 9
MAINTENANCE & CLEANING
Cleaning your LUCIDA SURFACES MaxCore 
Floorings is a breeze as all of our products 
are manufactured with a robust polyurethane 
coated wear layer. Please follow the cleaning 
guide outlined below. Only use cleaners that are 
provided as examples.
•  Only use a neutral PH cleaner to clean your 
floors such as ZEP Neutral Floor Cleaner 
or a mild dish detergent similar to Dawn. 
Use of stronger detergents such as Pine 
Sol is acceptable provided that the floors 
are followed up with a rinse to remove any 
residue. Failure to rinse floors may cause a 
buildup of detergent and may dull the finish 
of your floor (which is not covered under 
warranty). Cleaners only need to be used 
sparingly; more is not always better.
• 
Use of abrasive and harsh cleaners such 
as bleach or solvents will void the wear 
warranty. Only use mops with non-abrasive 
fibers to clean Sweep or vacuum daily using 
soft bristle attachments.
• 
Clean up spills and excessive liquids 
immediately.
• 
Damp mop as needed and use cleaners 
recommended for vinyl flooring.
•  Use proper floor protection devices such as 
felt protectors under furniture.
•  Place a walk-off mat at outside entrances to 
reduce the amount of dirt brought into your 
home. Do not use mats with a latex or rubber 
backing since these backings can cause 
permanent discoloration.
•  Do not use abrasive cleaners, bleach or wax 
to maintain the floor.
• 
Do not drag or slide heavy objects across 
the floor
PREVENTIVE CARE
• 
Felt pads must be placed under the legs 
of all furniture such as couches, tables, 
and chairs. This will protect your floor from 
damage and allows furniture to effortlessly 
glide over the flooring. Damage to the surface 
of flooring from dragging objects across it is 
not covered by warranty.
• 
Heavy furniture and appliances should be 
equipped with non-staining large surface 
floor protectors.
• 
When moving appliances or heavy objects 
over the flooring, ensure that sliding pads 
or protective blankets are used as damage 
caused by appliances is not covered under 
warranty.
•  When moving appliances or heavy furniture 
it is always wise to lay a plywood panel, or 
similar, on your floor and “walk” the item 
across it. This protects your floor from 
scuffing, gouging and damage.
•  Furniture with castors or wheels must swivel 
easily and be suitable for resilient floors. 
Do NOT use ball type castors as they can 
damage the floor. Caster wheeled chairs 
should have wide, rubber casters. Place 
protective mats under office chairs.
• 
Use floor protectors under furniture to reduce 
indentation. As a general rule of thumb, the 
heavier the item, the wider the floor protector 
should be.
• 
Do not allow standing water to remain on 
the surface of your flooring. Although your 
flooring is 100% water proof, standing water 
can seep into the sub-floor through the 
seams in the flooring causing issues with 
the adhesive and mildew within the sub-floor.










