User's Manual

Blue and
red LED
flashing
Blue and
red LED
flashing
Main speaker
Blue LED
light
Red led light
flashes then
power off
Main speaker
Main speaker
Main speaker
If speaker connected with you smart phone without
any playing it will power off in 30 minutes.
1
1
2
3
1
2
3
4
5 6 8
2
1
2
1
2
3
4
5
7
6
7
18829 Wireless Dual Stereo Speakers
Instructions
Stereo wireless speakers
Dual speakers Using
Speaker
Light
MFB
Charging
AUX Port
Power on
Press and hold MFB for 3 seconds until blue LED
flashes with a voice prompt "power on" .
Power off
Press and hold MFB for 4 seconds until red LED
flashes with a voice prompt "power off".
Pairing
When the speakers are off, press and hold MFB on
each speaker for 3 seconds to power them on. Both
LED lights flash in blue and red alternatively.
Please search “ ” on your smartphones bluetooth
list, and select it to pair with smartphone.
18829
Note: Above is first pairing operation, same device
will auto connect when power on.
Music Play/Pause
When listen to music, Short Press MFB to Play/Pause
switch .
Note: Any speaker can operate by above steps.
Answer Calls
Press MFB on the host
speaker to answer an
incoming call.
Note: The Main speaker speaker support calling function
( During bluetooth pairing, the double-click
speaker which is the Main speaker)
.
Reject calls
When calls come
in, press and hold
MFB 2 second
Siri support
Double Press MFB
when have been set up
connections between
smatphones
Note: iPhone need to setting Siri.
AUX input
1. Main speaker through the audio cable to connect
mobile phones, Ipad, notebook and other equipments.
Using the single speaker
Any speaker, Long press
MFB when the speaker off,
entering pair-mode then
red and blue lights flashes
alternately
Charging
Charge the speaker through the charging cable,
The green light is on when charging, full charge the
indicator light off automatically.
Attention
For other bluetooth operation, please refer to the above
steps.
When two speakers have been paired, one of the each
speaker can control the other one..
Main speaker is a connection between second
device and your mobile phone. It is normal status
under high power consumption.
The speakers will power off without any connection
in 3 minutes.
iPhone will prompt the internal battery power in real time.
When meet with error or any other issue, press and
hold MFB on both speakers for 10 seconds to reset.
Model: 18829
Bluetooth version: V5.0
Power(PMS): 2*3W
Speaker size:67.5*64*89MM
Dual speaker size:67.5*64*178MM
Holster size:72*69*198MM
Power input: 5V; 500mA
Speaker battery: 2*3.7 V/1000mAh
Speaker charging time: About 2-3 hour
Playing time: About 10 hour( Medium volume)
Profile support: HFP/A2DP/AVRCP
Frequency: 2.40GHz~2.48GHz
Sensitivity: -92dBm
Working temperature: -10~50°C
Transmission Distance: 10 M( without obstacle)
Weight: 446g (without holster) 546g (including holster)
Specification
When two in red and blue led flashes status,
double click any speaker (double-click the speaker as
Main speaker) , the indicator is still red, blue light
alternately flashing.
speakers
Main speaker through the audio cable to connect
mobile phones, Ipad, notebook and other equipments.
Combination
Strong magnet between two speakers
Please search on your
smartphones bluetooth list,
and select it to pair with
smartphone.
“18829”
AUX input
Main speaker
Speaker: 2pcs
User Manual: 1pcs
Micro USB cable: 1pcs
EVA Carry Case(Optional): 1pcs
What is in the box
Bluetooth
18829
Available equipment
18829
Device name
Available equipment
Bluetooth
Bluetooth
18829
Available equipment
18829
Device name
Available equipment
Bluetooth
FCC compliance statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
9