User Guide

7
FISHFINDER
NOTE: Each time the POWER-MENU key is pressed, the backlight momentarily illuminates
for easy viewing at night. Adjust the LIGHT menu setting to keep the backlight on.
SENSITIVITY
1 10
5
USER MODE
WIRELESS
8.1 User mode------
Press the POWER-MENU key until USER MODE menu appears. Select a setting from
8.2 Sensitivity—
Press the POWER-MENU key until SENSITIVITY appears. Sensitivity controls how much detail
is shown on the display. Increasing the sensitivity shows more sonar returns from small baitfish
and suspended debris in the water; however, the display may become too cluttered. When
operating in very clear water or greater depths, increased sensitivity shows weaker returns
that may be of interest. Decreasing the sensitivity eliminates the clutter from the display that is
sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the display may
not show many sonar returns that could be fish. (1 –10).
USER MODE
WIRELESS
USER MODE
SIMULATION
8.3 Depth Range---
DE TH RANGE P
AUTO 4 5
AUTO
Press the POWER-MENU key until DEPTH RANGE appears. Automatic is the default setting.
When in automatic, the lower range will be adjusted by the unit to follow the bottom.
(Auto, 1 to 45 meter)