Instruction Manual

14
15.1 Cutting performance / cutting forces
The cutting performance is indicated for perfect condition of the blades (new or perfectly
reground), central bolts tightened in accordance with the specifications and correct handling (see
Section 9) of the devices.
15.2 Central bolt / Torque
15.3 Oil recommendations
For LUKAS hydraulic devices, use mineral oil in accordance with DIN 51 524 and others
Recommended viscosity range: 10 ... 200 mm²/s,
delivered with HLP 22 to DIN 51 524
15.4 LUKAS Hoses
15.5 Others
Type LS 200 EN; LS 301 EN; LS 330 EN LS 131 EN
Central bolt M 24 x 1,5 (SW 36)
Torque (Nm) 120 + 10 100 + 10
Range of oil temperature Viscosity rating Remarks
A - 24 ... + 30 °C HL 5
B - 18 ... + 50 °C HLP 10
C - 8 ... + 75 °C HLP 22
D + 5 ... + 80 °C HLP 32
E - 8 ... + 70 °C HF - E 15 biodegradable
Bending radius Rmin = 38 mm
Burst resistance safety factor: burst pressure / max. operating pressure, min. 4 : 1
Temperature resistance - 40°C ... + 100°C
Operating medium Mineral oil according to DIN 51524
Working temperature -20 ... +55°C
Ambient temperature (power pack in operation) -24 ... +45°C
Storage temperature (power pack not in operation) -30 ... +60°C
Dimension of material
Type of Form of Strength LS 131 EN LS 200 EN LS 301 EN LS 330 EN
material material Rm (N/mm
2
) mm mm mm mm
600 (500) (Ø 24) Ø 30 Ø 28
750 Ø 20 Ø 25
450
60 x 5 80 x 10 80 x 8 110 x 10
Steel 40 x 40 x 4 40 x 40 x 4 55 x 55 x 4 60 x 60 x 4
40 x 30 x 4 60 x 30 x 6 65 x 40 x 5 65 x 40 x 6
400
35 x 3 80 x 40 x 6
Ø 42.6 x 2,6 Ø 114 x 4.5 Ø 72.3 x 3.2 Ø 84.3 x 3.2
Alu Ø 26 Ø 30 Ø 32 Ø 30