Operating Instructions Rescue Tools 84150/6108-85 D Ausgabe 12.
1 Basic operation and designated use of the machine 1.1 The machine has been built in accordance with state-of-the-art standards and the recognized safety rules. Nevertheless, its use may constitute a risk to life and limb of the user or of third parties, or cause damage to the machine and to other material property. 1.
General safety instructions 3.1 In the event of malfunctions, stop the machine immediately and lock it. Have any defects rectified immediately. 3.2 Before starting up or setting the machine in motion and during operation of the machine make sure that nobody is at risk. 3.3 Before transporting the machine always check that the accessories have been safely stowed away. 3.4 Make sure that there is enough lighting during work. 3.5 Avoid any operation that might be a risk to machine stability. 3.
.7 Aggressive material (acid, lye, solvent, vapour) can damage the machine. It is necessary to clean the whole machine if it must be exceptionally operated under such conditions or gets into touch with these materials. Additionally, the machine must be checked as described under 3.6. 5 Safety instructions for hydraulic hoses All instructions as to safe use of hydraulic hoses can be found in the booklet 84150/8056-85 delivered with the hoses. 6 Application 6.
Before coupling, remove the dust protection covers. Push the threaded sleeve back and connect plug and socket in this position. Screw the threaded sleeve onto the thread on the plug and tighten it by hand. Now the parts are connected and locked. Decoupling is done in the reverse order. 9 Operation of Hand pump The pump can be used both in horizontal and vertical position, i.e. with the pump head downwards. drain valve Pumps Make sure that the drain valve is closed (turn lever clock-wise).
10.4 Operating: Safety instructions When operating rescue devices, wear protective clothing • helmet with visor or goggles • protective gloves. During operation of this rescue device, parts of the object worked on with this device may break away and endanger people standing nearby. Onlookers must be kept at a safety clearance of at least 5 m. 10.4.1 Door opener HT 90 When applying the unit, the claws must be pressed or beaten into the door crack as hard and deep as possible.
11.2 Maintenance of the working tools 11.2.1 LH1/0,5-70 To guarantee safety and operational function of the rescue tool it is definitely necessary to make a visual inspection after each operation at least once a year if tool has not been used. Remark for maintenance: Use oiled towel for protection against corrosion at outside of the pump. 11.2.2 HT 90 Special points of inspection are all parts for load holding function, e.g. links, bolts and hoses, to be checked on damages. 11.2.
13 Troubleshooting Problem Cause Solution Cylinder does not Oil level in pump reservoir is Add oil according to the operating instructions on 11.1 advance, advances low slowly or advances Drain valve open Close drain valve in spurts Loose hydraulic coupler Check that all couplers are fully tightened Load is too heavy Do not attempt to cut more than rated tonnage Air trapped in system Remove air according to the instructions on 9.
14.2 Cutter Type Order no. Cutting force (kN) Blade opening (mm) Cutting width (mm) Cutting depth (mm) Operating pressure (MPa)* Dimensions l x w x h (mm) Weight (kg) LC 75/40 84150/6431 76 40 38 40 70 216 x 51 x 76 3 * 1 MPa =10bar 14.3 Door opener Type Order no. Spreading force (kN) Stroke (mm) Operating pressure (MPa)* Dimensions l x w x h (mm) Weight (kg) HT 90 84150/6129 90 100 70 410 x 280 x 125 5.7 * 1 MPa =10bar 14.
14.6 Others -20 ... +55°C -24 ... +45°C -30 ... +60°C © Copyright 2004 LUKAS Hydraulik GmbH Working temperature Ambient temperature (power pack in operation) Storage temperature (power pack not in operation) LUKAS Hydraulik GmbH A Unit of IDEX Corporation Weinstraße 39, 91058 Erlangen • Germany Postfach 2560, 91013 Erlangen • Germany Telefon +49 (0) 9131 698-0 • Telefax +49 (0) 9131 698-394 E-mail: info@lukas.de 84150_6108_85_e.
