Instruction Manual

21
* 1MPa = 10 bar;
** Necessary oil quantity in the hydraulic power pack for operating the tool
(Difference in quantity piston / rod side)
14.1 Central bolt / Torque
14.2 Oil recommendations
Oil for LUKAS Hydraulic devices: Mineral oil DIN 51524 and others
Recommended viscosity range: 10 … 200 mm
2
/s
Delivered with HLP 22 DIN 51524
14.3 Hoses
14.4 Temperature ranges
Typ of cutter
Connection / control 4/3-way-valve Electric controls Cylinder bottom
Ref. no. 84150/1494 84150/91494 84150/81494
Dimensions l x w x h
without
connection hoses
(mm) 862 x 235 x 168 860 x 235 x 168 626 x 235 x 168
Opening at tips (mm)
Weight incl. oil filling (kg) 23,9 22,5 21
Operating pressure (Mpa)*
Necessary oil quantity (l)**
LSI 55
430
50
0,11
Range of oil temperature Viscosity rating Remarks
A -24 .... +30°C HL 5
B -18 .... +50°C HLP 10
C -8 .... +75°C HLP 22
D +5 .... +80°C HLP 32
E -8 .... +70°C HF - E15 biodegradable
Bending radius Rmin = 38 mm
Burst resistance Safety factor: burst pressure / max. operating pressure, min. 4 : 1
Temperature resistance - 40°C ... + 100°C
Operating medium Mineral oil according to DIN 51524
Operating temperature -20 ... +55°C
Ambient temperature (device in operation) -24 ... +45°C
Storage temperature (device not in operation) -30 ... +60°C
Type LSI 501 / LSI 511 / LSI 530 / LSI 55
Central bolt M 27 x 1,5
Wrench size (mm) 41
Torque (Nm) 130+10