Instruction Manual

23
14.6 Test pressures
The stated reference test pressures only refers to the measurement with the LUKAS
testing kit (from the LUKAS accessories programme).
Measurements and thresholds with other test equipment must be agreed in advance with
the LUKAS service department.
Type of cutter
Testing
pressure
Operating
pressure
LSI 501 225 bar
LSI 511 330 bar
LSI 530 340 bar
LSI 55 260 bar
50 MPa
LSI5XX_BA_GB_841501490_0706.p65 © Copyright 2006 LUKAS Hydraulik GmbH
LUKAS Hydraulik GmbH
A Unit of IDEX Corporation
Weinstraße 39, 91058 Erlangen
Postfach 2560, 91013 Erlangen Germany
Telefon [phone] • Telefax [phone]
E-Mail: [e-mail]
subject to revision