User guide

18
Max. Dimensions of Material
LSI 230 LSI 230 LSI 235 LSI 235
Type of Form Strength max. cutting Continous max. cutting Continous
material of Rm performance cutting performance cutting
material performance performance
N/mm
2
mm mm mm mm
750 dia. 23 dia. 18 dia. 23 dia. 18
500 dia. 25 dia. 20 dia. 25 dia. 20
500 55 x 4 40 x 4 55 x 4 40 x 4
Steel 500 dia. 72 x 3 dia. 60 x 3 dia. 72 x 3 dia. 60 x 3
500 45 x 45 x 6 50 x 50 x 5 45 x 45 x 6 50 x 50 x 5
100 x 10
500
60 x 15
80 x 8 80 x 10 80 x 8
500 65 x 40 x 6 60 x 30 x 6 65 x 40 x 6 60 x 30 x 6
Alu 400 dia. 28 dia. 24 dia. 28 dia. 24
Copper 200 dia. 35 dia. 28 dia. 35 dia. 28
Max. Dimensions of Material
LSI 240 LSI 240 LKS 10 LKS 10
Type of Form Strength max. cutting Continous max. cutting Continous
material of Rm performance cutting performance cutting
material performance performance
N/mm
2
mm mm mm mm
750 dia. 23 dia. 18 dia. 15 dia. 12
500 dia. 25 dia. 20 dia. 16 dia. 13
500 55 x 4 40 x 4 20 x 3 20 x 2
Steel 500 dia. 72 x 3 dia. 60 x 3 dia. 25 x 3 dia. 20 x 3
500 45 x 45 x 6 50 x 50 x 5 20 x 15 x 3 15 x 15 x 3
100 x 10
500
60 x 15
80 x 8 16 x 10 20 x 6
500 65 x 40 x 6 60 x 30 x 6 -- --
Alu 400 dia. 28 dia. 24 dia. 20 dia. 16
Copper 200 dia. 35 dia. 28 dia. 20 dia. 18
For daily use it is to be distinguished between max. cutting performance and cutting
performance under permanent duty.
In the interest of a long tool life and acceptable service intervals, we recommend not to
exceed permanently the fi gures given for permanent duty. Applications in the range of
the max. cutting performance require a perfect condition of the blades and shortened
service intervals.