Manual

Inspections to be carried out:

Visual inspection

Cutter and combi tool

• Opening width of the blade arms on the tips (see chapter "Technical data"),

• General tightness (leaks),

• Ease of movement of star handle,

• Existence and stability of handle,

• Labels completely existent and legibly,

• Covers in perfect condition,

• Check the tightening torque of the pivot bolt (tightening torque M

see "Technical data").

• Blade arms free of cracks and cutting surfaces without nicks or deformations,

• Cutting surfaces go on top of each other without making contact,

• The sliding plates, bolts and retaining rings of the blade arms are in place and in good

condition,

• Illumination of main switch, work area and connection slot fully functional.

Spreader

• Opening width of arms at the tips (see chapter on "Technical Data"),

• General tightness (leaks),

• Ease of movement of star handle,

• Existence and stability of handle,

• Labels completely existent and legibly,

• Covers in perfect condition,

• Spreader arms not cracked,

• Bolts and retaining rings of spreader arms in place and in good condition,

• The corrugations on the tips should be clean and square, without cracks

• The tips must be in place and locked

• Illumination of main switch, work area and connection slot fully functional.

Rescue ram

• Piston can be extended to its full length (see chapter on "Technical Data"),

• Cylinder and piston rod undamaged and not deformed,

• Claws correctly and securely ﬁ tted,

• Claws can be turned and are undamaged (no break-outs),

• General tightness (leaks),

• Ease of movement of star handle,

• Labels completely existent and legibly,

• Illumination of main switch, work area and connection slot fully functional.

8.1 Overview of eDRAULIC devices