User Manual

22
Inspections to be carried out:
Visual Inspection
Cutting and combination tool
• Opening width of the blade arms on the tips (see chapter "Technical data"),
• General tightness (leaks),
• Operability of the star grip - check the automatic return into middle position after release
(dead man’s function),
• Existence and stability of handle,
• Labels complete and legible,
• Covers in perfect condition,
• Check the torque of the pivot bolt (for torque M
A,
see "Technical Data").
• Blade arms free of cracks and nicks or deformations on the cutting surfaces,
• Cutting surfaces fi t on top of each other without making contact,
• The sliding plates, bolts and retaining rings of the blade arms are in place and in good
condition,
• Illumination of main switch, work area and connection shaft fully functional.
Spreader
• Opening width of arms at the tips (see chapter on "Technical Data"),
• General tightness (leaks),
• Operability of the star grip,
• Existence and stability of handle,
• Labels complete and legible,
• Covers in perfect condition,
• Spreader arms not cracked,
• Pins and retaining rings on the spreader arms are present and in a proper condition,
• Corrugation of the tips clean and well-edged, no tears.
• The tips must be in place and locked
• Illumination of main switch, work area and connection shaft fully functional.
Rescue rams
• Piston can be extended to its full length (see chapter on "Technical Data"),
• Ram and piston rod undamaged and not deformed,
• Correct and fi rm fi t of claws,
• Claws can be turned and are undamaged (no break-outs),
• General tightness (leaks),
• Operability of the star grip,
• Labels complete and legible,
• Illumination of main switch, work area and connection shaft fully functional.
8.1 Overview of eDRAULIC devices