Installation Guide

ManualsBrandsLulani ManualsBathCorsica Collection. 4 in. Centerset 2-Handle Bathroom Faucet. in Gun Metal finish.

Table Of Contents

1. Faucet

2. Above sink hardware: rubber O-ring

3. Below sink hardware: rubber washer,

metal washer, mounting nut

4. Water supply lines

5. Over-ﬂow pop-up drain

Parts Included

Recommended Tools (not included)

1. Adjustable Wrench

2. Phillips Screwdriver

3. Safety Goggles

4. Flashlight

5. Bucket

6. Measuring Tape

7. Plumber’s Putty

8. Channel Locks

9. Allen Key

Installation Instructions

BA-330-02

Two Handle Centerset Bathroom Faucet

Thank you for selecting Lulani.

To ensure that your installation proceeds smoothly, please read

these instructions carefully before you begin.

Corsica

Note: This faucet

has been packaged

with an over-ﬂow

pop-up drain. DO NOT

use with a non-over-ﬂow

sink.

Fa u c e t C o

Summary of content (4 pages)

PAGE 1
Fa u c e t C o Installation Instructions Corsica BA-330-02 Two Handle Centerset Bathroom Faucet Thank you for selecting Lulani. To ensure that your installation proceeds smoothly, please read these instructions carefully before you begin. Parts Included 1. Faucet 2. Above sink hardware: rubber O-ring 3. Below sink hardware: rubber washer, metal washer, mounting nut 4. Water supply lines 5. Over-ﬂow pop-up drain 2 3 1 5 Note: This faucet has been packaged with an over-ﬂow pop-up drain.
PAGE 2
Caution: Tips for removal of old faucet Always turn off the water supply before removing the existing faucet or replacing any part of the faucet. Open the faucet handle to relieve water pressure and ensure that water is completely shut off. Maintenance Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the ﬁnish and void your warranty.
PAGE 3
Step 3 Connect the water supply lines to the tail pipes (1) of the faucet and to the hot and cold water supply valves. Secure and tighten with an adjustable wrench. 1 Caution: Be careful not to mix up the hot and cold supply lines. 1 Check all connections (shown with arrows in the image) for leaks. Re-tighten if necessary. Do not over tighten! COLD HOT Step 4 2 From the top of the drain hole, place the drain (1) through the installation hole.
PAGE 4
Step 5 Hand remove the rubber o-ring (1), aerator core (2), and aerator collar (3). Turn the faucet handle all the way on, turn on the hot and cold water supply and ﬂush the water lines for one minute. Then, re-install the aerator. 1 2 3 About our products Inspired by Corsica’s beautiful waters and bold craggy peaks of the mountainous Mediterranean islands, the Corsica bathroom faucet collection is sure to be the highlight of any resort-style bathroom.