Installation Guide

Step 3
Connect the water supply lines to the water valves. Tighten each
end with an adjustable wrench. Do not over tighten!
Check all connections (shown with arrows in the image) for leaks.
Re-tighten if necessary.
3
Step 4
From the top of the drain hole, place the drain (1) through the
installation hole. Make sure that the rubber o-ring (2) is on the
top side of the sink. From under the drain hole, install the rubber
gasket (3) and metal nut (4) by hand twisting on to the tail pipe
of the drain. Then, install the tail pipe to the wall plumbing.
2
1
3
4
What’s an over-flow pop-up drain?
Over-Flow
Non-Over-Flow
Over-Flow
Non-Over-Flow
The primary purpose of the over-flow drain is to help your sink drain
faster. The over-flow on the drain works in coordination with the
primary drain to prevent flooding.
*Note: Lulani faucets are packaged with over-flow drains by default. If you have a specialty
sink and need a NON-over-flow drain, use the QR code below to view our alternative drain
options. Use code [FREEDRAIN] at checkout to receive a free drain, just pay for shipping.
*Limit of 1-time use per customer
*Limited to the number of faucets purchased