Owner Manual

2
Step 2
Step 1
Caution: Tips for removal of old faucet
Always turn off the water supply before removing the existing faucet or replacing any part of the faucet.
Open the faucet handle to relieve water pressure and ensure that water is completely shut off.
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it
periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the
finish and void your warranty.
Single hole bathroom faucets can be installed
in a sink with a single hole OR a sink with 3 holes,
typically meant for a 4” centerset faucet.
A. For 1-hole installation, insert the faucet’s (1)
water supply hoses (2) through the rubber o-ring (3).
Then, insert the assembly through the hole.
B. For 3-hole installation, insert the faucet’s (1)
water supply hoses (2) through the 4” baseplate (3).
Then, insert the assembly through the center hole.
The baseplate will cover the surrounding holes.
1
3
4
2
Secure the faucet with the rubber washer (1), metal
washer (2), screw (3), and lock nut (4). Use an
adjustable wrench to tighten. Do not over tighten!
3
1
2
A
B
2
1
3