Owner Manual

Step 3
Connect the water supply lines to the water valves. Tighten each
end with an adjustable wrench. Do not over tighten!
Check all connections (shown with arrows in the image) for leaks.
Re-tighten if necessary.
3
Step 4
From the top of the drain hole, place the rubber gasket (2) on to the
drain (1). Then insert through the installation hole. From under the
drain hole, the rubber gasket (3), plastic washer (4), and metal nut (5)
will be installed.
Install the non-threaded side in to the wall plumbing. Then, bring the
tail pipe up to connect to the drain. Slide the rubber gasket (1) and
metal gasket (2) over the threads of the drain body (3) and hand
tighten. Do not over tighten.
What’s an over-fl ow pop-up drain?
Over-Flow
Non-Over-Flow
Over-Flow
Non-Over-Flow
The primary purpose of the over-flow drain is to help your sink drain
faster. The over-flow on the drain works in coordination with the
primary drain to prevent flooding.
*Note: Lulani faucets are packaged with over-flow drains by default. If
you have a specialty sink and need a NON-over-flow drain, please contact
us for details.
1
2
3
2
1
3
5
4