Owner's manual

Section 7 - Lubrication and Maintenance

7-2131200608

Hydraulic Return Filter

A. Hydraulic Return Filter Indicator Check

1. Apply park brake, shift transmission to "Neutral" and lower forks or attachment

to horizontal position.

2. Check hydraulic return filter indicator with engine at normal operating

temperature.

3. With an assistant observing the indicator (2) located on the hydraulic return

filter (1), extend and retract the boom 10 to 12 ft (3,0 to 3,7 m). The bar gauge

should be within the green area.

4. Replace filter before the gauge reaches the red area on the indicator. If it

reaches the red area, the filter is too dirty and hydraulic oil is bypassing the

filter.

OW0970

OW1060

OV0600