Owner's manual

Section 3 - Controls and Indicators

3-731200608

Park Brake

Park brake knob (1) controls the application and release of the park brake.

• Pull knob out to engage park brake. Push knob in to disengage park brake.

• With the engine running and the park brake knob pushed in, park brakes are

disengaged.

• With knob pulled out, park brake is engaged and transmission will not engage

forward or reverse.

Parking Procedure

1. Using service brake, stop telehandler in an appropriate parking area.

2. Follow “Shut-Down Procedure” on page 4-4.

WARNING

MACHINE ROLL-AWAY HAZARD. Always pull park brake knob out, lower boom

to ground and stop engine before leaving cab.

WARNING

CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake

or turning engine off while traveling will cause unit to stop abruptly and could

cause load loss. Either may be used in an emergency situation.

OV0150