Owner's manual

Section 5 - Attachments
5-10 31200608
This installation procedure is designed for one-person operation. Prior to exiting cab,
perform “Shut-Down Procedure” on page 4-4.
1. Tilt quick switch back to provide clearance.
Check to be sure lock pin is removed.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick switch forward to engage attachment.
4. Lift retaining pin and insert lock pin completely
through quick switch. Release retaining pin and
ensure lock pin is secured.
5. If equipped, connect auxiliary hydraulic hoses. See “Hydraulic Operated
Attachment” on page 5-11.
OY1550
OY1560
OY1570
OY1580