Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
6-3
Removal
Joystick
Fig. 6-3: Joystick Installation
(Ref. Fig. 6-3) The following steps are required to remove the joystick.
1. Follow preparation procedures as outlined in Section 3 of this manual.
2. Remove two (2) capscrews (Item 14) and lockwashers (Item 15)
securing side panel (Item 13) to control panel (Item 8). Remove side
panel.
J1120
# Description
1 Button Head Socket Capscrew
2 Lockwasher with Internal Teeth
3 Phillips Truss Head Screw
4 Flatwasher
5 Wiring Harness
6 Lead Connector
7Joystick
8 Control Panel
# Description
9 Connector
10 Connector
11 Swivel Tee
12 Hydraulic Hose
13 Side Panel
14 Capscrew
15 Lockwasher
3
5
4
6
1
2
7
8
14
15
13
9
10
11
12
12
9
10
11