Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
6-58
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Removal
Quick Attach
1. Disconnect attachment from quick attach.
2. Fully retract boom and transfer carriage (if equipped), level quick
attach and lower boom to ground.
3. Set park brake, lock shift selector in NEUTRAL position, shut off
engine and remove ignition key from switch. Block all wheels.
Fig. 6-50: Lower Pivot of Carriage Tilt Cylinder
4. (Ref. Fig. 6-50) Remove capscrew (Item 3), lockwasher (Item 4), and
lock pin (Item 5) from lower pivot pin (Item 2) of front carriage tilt
cylinder (Item 6). Remove pivot pin from quick attach (Item 1).
J1067
6
5
4
3
2
1
# Description
1 Quick Attach
2Pivot Pin
3 capscrew
# Description
4 Lockwasher
5Lock Pin
6 Front Carriage Tilt Cylinder