Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
6-96
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Fig. 6-98: Clearances Between Boom Sections – Front of 3-Section Boom
11. Adjust boom positions to obtain clearances between boom sections as
shown in Fig. 6-98. Measure these clearances at the slide pad
locations.
Fig. 6-99: Gaps Between Pads and Boom – Front of 3-Section Boom
J1064
0.688"–0.750"
(11/16"–3/4")
0.750"–0.813"
(3/4"–13/16")
J1065
0.030"–0.063"
(1/32"–1/16") gap
between pads and
boom