Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
6-106
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Fig. 6-111: Rod End of Extension Cylinder
15. (Ref. Fig. 6-111) Loosen two (2) setscrews (Item 2) and remove
extension cylinder nut (Item 4) and washer (Item 5). Place blocks
between extension cylinder (Item 3) and support bracket (Item 6) to
prevent damage to cylinder during disassembly.
16. Back the machine away from the middle boom section until it is
completely separated.
J1093
# Description
1 Inner Boom Section
2Setscrew
3 Extension Cylinder
# Description
4Nut
5 Washer
6 Support Bracket
4
5
2
6
1
3