Service Manual User guide

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
6-111
29. (Ref. Fig. 6-115) Carefully lift the outer boom (Item 7) clear of the
transfer carriage/boom cradle (Item 6).
30. Swing the boom away from the machine and position it above a firm,
level surface.
31. (Ref. Fig. 6-112) Tag and disconnect the carriage tilt (Item 3) and
auxiliary hydraulic hoses (Item 2) at the bulkhead elbows (Item 1). Cap
hoses and fittings.
Fig. 6-116: Hydraulic Tubes, Outer Boom
32. (Ref. Fig. 6-116) Disconnect the auxiliary and carriage tilt hydraulic
tubes (Items 2 and 3) from the swivel elbows (Item 1) in the outer
boom. Remove the cushion clamps and hydraulic tubes.
J1092
# Description
1 Swivel Elbows
2 Auxiliary Hydraulic Tubes
# Description
3 Carriage Tilt Tubes
2
1
3