Service Manual User guide

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
6-115
37. (Ref. Fig. 6-120) Remove the rear chain roller assembly from the rear
of the middle boom section.
Fig. 6-121: Rear Slide Pads, Middle Boom Section
38. (Ref. Fig. 6-121) Remove slide pads, shims, and attaching hardware at
the rear of the middle boom section.
39. Support the inner boom section.
W
Fig. 6-122: Front Slide Pads, Middle Boom
40. (Ref. Fig. 6-122) Remove eight (8) slide pads and attaching hardware
from the front of the middle boom section.
41. Remove the inner boom section out from middle boom section and
place on work stands.
J1090
J1099