Service Manual User guide

Boom and Transfer
6-116 Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Fig. 6-123: Rear Chain Anchor
42. (Ref. Fig. 6-123) Remove the upper and lower chains from the inner
boom section as follows:
a. Remove a lock nut (Item 5) from the upper chain anchor rod
(Item 9). Remove the anchor rod from rear chain anchor (Item 3).
Pull upper chains (Item 1) out through the front of the boom.
b. Remove the lock nut (Item 2) from the lower chain anchor shoulder
bolt (Item 4). Remove the shoulder bolt. Pull the lower chain
(Item 8) out through the rear of the inner boom section.
c. Remove the three (3) capscrews (Item 7) and lockwashers (Item 6)
securing the rear chain anchor to the rear of the inner boom
section. Remove the rear chain anchor.
J1100
# Description
1 Upper Chains
2 Lock Nut
3 Rear Chain Anchor
4 Shoulder Bolt
5 Lock Nut
# Description
6 Lockwasher
7Capscrew
8 Lower Chain
9Chain Anchor Rod
10 Lock Nut
1
5
2
3
4
8
9
10
6
7