Service Manual User guide

Boom and Transfer
6-122 Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
14. (Ref. Fig. 6-128) Install rear slide pads and shims on the inner boom
section according to drawing specifications. See “Shimming
Procedures” on page 6-91 for details.
a. Install the upper shims (Item 2) and slide pads (Item 1). Install
each pad retainer (Item 3) with a flatwasher (Item 4), lockwasher
(Item 5), and capscrew (Item 6). Torque the capscrew to 200 ft-lbs.
b. Install each side shim (Item 7) and slide pad (Item 8) with two (2)
lockwashers (Item 9) and button head capscrews (Item 10). Torque
the capscrews to 65 ft-lbs.
Fig. 6-129: Rear Slide Pads, Middle Boom
15. (Ref. Fig. 6-129) Install the rear slide pads and shims on the middle
boom section according to drawing specifications. See “Shimming
Procedures” on page 6-91 for details.
a. Install the upper shims (Item 2) and slide pads (Item 1). Install
each pad retainer (Item 3) with a flatwasher (Item 4), lockwasher
(Item 5), and capscrew (Item 6). Torque the capscrew to 200 ft-lbs.
b. Install each side shim(s) (Item 7) and slide pad (Item 8) with two (2)
lockwashers (Item 9) and button head capscrews (Item 10). Torque
the capscrews to 65 ft-lbs.
c. Install the lower slide pads (Item 11) with two (2) lockwashers
(Item 12) and button head capscrews (Item 13). Torque the
capscrews to 276 in-lbs.
J1288
# Description
1 Upper Slide Pad
2Shim
3 Pad Retainer
4 Flatwasher
5 Lockwasher
6 Capscrew
7Shim
# Description
8 Side Slide Pad
9 Lockwasher
10 Button Head Socket Capscrew
11 Lower Slide Pad
12 Lockwasher
13 Button Head Socket Capscrew
1
2
3
4
5
6
7
8
9
10
11
12
13