Service Manual User guide

Boom and Transfer
6-172 Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Fig. 6-187: Slide Pad Removal – Middle (Forward) Boom Section
20. (Ref. Fig. 6-187) Remove remaining slide pads from middle (forward)
boom section as follows:
a. Remove four (4) capscrews (Item 11) and lockwashers (Item 12)
securing two (2) side slide pads (Item 7) to front of middle (forward)
boom section (Item 13). Remove slide pads and shims (Item 8).
Repeat this step for the rear side slide pads.
b. (Ref. Fig. 6-187) Remove two (2) each capscrews (Item 6),
lockwashers (Item 5), flatwashers (Item 4), and pad retainers
(Item 3) from front of middle (forward) boom section.
J1231
1
2
3
4
5
6
7
10
9
8
12
11
17
16
7
9
14
12
11
13
15
19
20
18
View A
1044C-54 (S/N 101–154)
10K-54 (S/N 101–103)
# Description
1 Front Bottom Slide Pad
2Shim
3 Pad Retainer
4 Flatwasher
5 Lockwasher
6 Capscrew
7 Side Slide Pad
8Shim
9 Button-Head Socket Capscrew
10 Lockwasher
# Description
11 Button-Head Socket Capscrew
12 Lockwasher
13 Middle (Forward) Boom Assy
14 Button-Head Socket Capscrew
15 Lockwasher
16 Shim
17 Rear Bottom Slide Pad
18 Pad Retainer
19 Capscrew
20 Lockwasher