Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
6-232
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
Boom Cradle
Description
Fig. 6-245: Boom Cradle
The boom cradle is a stationary structure, similar to a transfer carriage. It
is only found on “K” Models: 6K, 8K, 10K. Unlike the transfer carriage
found on Models 644B, 844C, and 1044C, the boom cradle does not allow
for boom “Tans-Action” (see page 6-217).
Removal
Boom Cradle
The following steps are required to remove the boom cradle.
1. Follow preparation procedures as outlined in Section 3 of this manual.
2. Lower the boom to the ground, apply the park brake, and stop the
engine.
(Models 6K, 8K and 10K On
l
0
80
60
40
20
-20
J1141