Service Manual User guide
Table Of Contents
- 10709790_B_644B,6K,844C,8K,1044C,10K_Lull_Service_Mnl
- Quick Reference
- Revision Record
- Table Of Contents
- List Of Figures
- List Of Tables
- Section 1 Safety
- Section 2 Identification & Specifications
- Section 3 General Maintenance
- Section 4 Reference Diagrams
- Section 5 Supply, Pressure & Return Hydraulics
- Section 6 Boom & Transfer
- Section 7 Frame Tilt & Oscillation
- Section 8 Transmission
- Section 9 Brakes
- Section 10 Outriggers
Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
6-245
Removal
Transfer Cylinder
Fig. 6-257: Transfer Cylinder Installation
(Ref. Fig. 6-257) The following steps are required to remove the transfer
cylinder.
1. Follow preparation procedures as outlined in Section 3 of this manual.
2. Lower the boom to the ground, apply the park brake, retract the
cylinder, and stop the engine.
3. Loosen and remove hydraulic tube (Item 10) from elbow on transfer
cylinder (Item 5). Bleed any remaining oil into a suitable container.
J1139
5
# Description
1Setscrew
2 Rod Nut
3 Washer
4 Transfer Carriage
5 Transfer Cylinder
6 Main Frame
# Description
7 Lockwasher
8Capscrew
990° Elbow
10 Hydraulic Tube
11 Hydraulic Hose
2
3
1
7
8
10
11
4
6
9