Because you’re not like everybody else EVAPORATIVE COOLER EC45S OWNER’S MANUAL .
BECAUSE YOU’RE NOT LIKE EVERYONE ELSE. And neither are we. Always at the forefront of our industry, our goal is to offer the best quality product and consumer value on the market. Our team is constantly pushing the boundaries of innovation and design to create exceptional products to help you achieve a more comfortable living or work space. Our goal is to ensure that every Luma Comfort customer is 100% satisfied with their product.
CONTENTS Important Safety Information .......................................................................... 4 Get To Know Your Evaporative Cooler ............................................................. 5 Product Benefits .......................................................................................... 5 Parts List...................................................................................................... 5 Parts Diagram .......................................................
IMPORTANT SAFETY INFORMATION These instructions are not meant to cover every possible condition and situation that may occur. Please read all instructions before using this evaporative cooler. Failure to carefully read all instructions may result in possible electric shock or fire hazard, and will void the manufacturer’s warranty. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Use this evaporative cooler only as instructed in this owner’s manual. Other uses may cause electric shock, injury or fire.
GET TO KNOW YOUR EVAPORATIVE COOLER PRODUCT BENEFITS Designed to cool smaller areas such as single rooms, office cubicles and personal spaces Sleek, modern design makes it an attractive addition to your home Tower body shape saves space High-efficiency, rigid cooling pad holds more water Powerful motor results in more powerful airflow, faster evaporation and cooler air Consumes as much electricity as your typical 45 watt light bulb Eco-friendly evaporative cooling system cools the air by
PARTS DIAGRAM 1. 2. 3. 4. 5. Control panel Display panel Remote control receiver Air louvers Water level indicator 6. 7. 8. 9. Caster Dustproof air filter Cooling pad slot Water tank www.LumaComfort.com 10. Power cord 11. Water tank knob 12. Ice pack 13.
OPERATING INSTRUCTIONS SET UP Carefully remove all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any of the components. No tools will be required to assemble this evaporative cooler. Place the cooler on a firm, level surface before proceeding. Before using the evaporative cooler for the first time, we recommend cleaning the tank with a solution of warm water and light detergent. FILLING THE WATER TANK 1. 2. 3.
USING THE ICE PACK The Luma Comfort EC45S tower evaporative cooler includes an optional ice pack for added cooling. 1. 2. 3. 4. Place the ice pack in the freezer until frozen. Do not open the ice pack or ingest its contents. Open the water tank and put the ice pack into one of the water tank’s chambers. The ice pack is not necessary for operation, but will help enhance the cooling effect in higher temperatures. The ice pack will last approximately 4 hours before melting.
After the tank is filled with water, connect the evaporative cooler to a power outlet. The unit will beep twice, indicating that the power source is connected. The cooler will be in standby mode at this time. ON/SPEED & OFF Buttons Press the ON/SPEED button to turn on the evaporative cooler. To adjust the fan speed, press ON/SPEED button again until your desired speed has been reached. The current fan speed will be indicated on the display panel.
Natural Mode Sleep Mode Natural Mode – Indicated by the palm tree icon on the display panel, this setting will automatically vary the airflow speed between low, medium and high. Sleep Mode – Indicated by the moon icon on the display panel, this setting will gradually lower the speed at different intervals, depending on the selected fan speed. If the fan speed is set to 3, the cooler will run for 30 minutes on high speed, 30 minutes on medium speed, and then continue to operate on low speed.
USING THE REMOTE CONTROL The Luma Comfort EC45S is equipped with a remote control. A CR2032 3V coin-type replacement battery is included for your convenience. 1. 2. To put the battery inside the remote control, insert a coin into the slot located on the back of the remote control and turn it as directed on the remote control. To use the remote control, aim it at the unit’s remote control receiver and select one of the functions on the remote control. The effective distance is approximately 24”.
EXTERIOR CLEANING 1. 2. Use a soft cloth and a mild soap and warm water solution to clean the unit’s exterior. Do not use harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the evaporative cooler. Thoroughly dry all of the cooler’s parts with a soft cloth before reconnecting the unit to the power supply.
WATER TANK CLEANING The water tank should be emptied regularly to ensure hygienic use. To empty the tank: 1. 2. 3. 4. Unlock and pull open the water tank. Place a small dish beneath the extended water tank. Remove the white plug from the bottom of the water tank to allow water to drain out into the dish. When empty, replace the plug in the drain. Be sure it is secure to avoid leaking. In addition, the tank should be cleaned several times a year to remove hard water and mineral deposits.
TECHNICAL SUPPORT Luma Comfort is committed to providing a premier service experience. If you are experiencing any technical issues with your product related to either setup or operation, please contact our product support team at 1-866-737-6390 or support@lumacomfort.com. PRODUCT SPECIFICATIONS Model: Product Dimensions: Product Weight: Voltage: Wattage: Coverage Area: Tank Size: Fan Speeds: Noise Level (dB): Airflow: Oscillation: Warranty: EC45S 11.7” x 11.7” x 37.2” 12.
TROUBLESHOOTING Problem There is no airflow. The unit does not cool at all. a. a. b. The water tank is not locked into the unit. b. a. There is insufficient water in the tank. a. b. The cooler/humidifier button was not pressed. The pump is defective. b. c. The unit does not sufficiently cool. Water is coming out of the vents. Possible Cause(s) The power cord is not plugged in. The cooling pad is not sufficiently saturated with water. The cooling pad may be clogged with debris.
WARRANTY Luma Comfort products are warranted to be free from defects in workmanship or materials for one (1) year from the date of purchase. If the product is found to be defective within this period, Luma Comfort, at its sole option, will repair or replace any components that fail during normal operation. The repairs or replacement will be made at no charge to the customer for parts and labor, assuming that the customer shall be responsible for all transportation costs to and from Luma Comfort.