SDS

Page 3 of 10
Issuing date: March 7, 2018
Copper
7440-50-8
231-159-6
10%
Cobalt oxide
1307-96-6
215-154-6
8.5%
Manganese
7439-96-5
231-105-1
4.5%
Cobalt
7440-48-4
231-158-0
4.2%
Aluninum
7429-90-5
231-072-3
1.5%
Iron
7439-89-6
231-096-4
1.2%
Magnesium
7439-95-4
231-104-6
0.02%
4. First aid measures
Persons using this product should consult a physician or other medical professional if an accident involving this product
results in injury. Specific first-aid measures are as follows: (for contact with leakage from rupture)
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a doctor/physician if you
feel unwell.
Skin Contact: Take off contaminated clothes. Wash with soap and water. Wash contaminated clothes before reuse. If skin
irritation or rash occurs: Get medical advice/attention.
Eyes Contact: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper andlower eyelids. If eye
irritation persists: Get medical advice/attention.
Ingestion: Rinse mouth. Do not induce vomiting without professional instruction. Call a doctor/physician if you feel unwell.
Acute effect and delayed effect: Acute effect: Causes skin irritation. May cause an allergic skin reaction. May cause allergy or
asthma symptoms or breathing difficulties if inhaled.
Delayed effect: Suspected of causing genetic defects. May cause cancer. May damage fertility or the unborn child. Causes
damage to organs (respiratory) through prolonged or repeated exposure.
Personal protective equipment: Wear protective gloves/protective clothing/eye protection/face protection when necessary.
Indication of immediate medical attention and treatment needed, if necessary: Treat according to symptoms and exposure
dose.
5. Fire-fighting measures
Extinguishing Media: Use water, dry chemical, dry sand for extinction.
Unsuitable Extinguishing Media: High volume water jet. Discharging cylinder shape water from fire hose may lead to spread
fire to the surroundings.
Special hazards arising from the chemical: Cell may vent when subjected to excessive heat-exposing battery contents.
Fire Fighting Method (This is for fire caused by other ignition sources):
For initial fire, use water, dry chemical, dry sand, etc.
For large fire, it is effective to use fire foam, etc. to shut off air supply.
Remove containers from fire area if it can be done without risk.
Cool surrounding facilities, etc. with water spray.
Extinguish fire from upwind, and the fire extinguishing method should be appropriate to the situation in the surroundings.
Special actions for fire-fighters: Firefighters must wear self-contained breathing apparatus and full protective equipment.
Check whether the protective equipment is in good condition before use.