User Manual

InfraWin 5 Manual Controller  27
6 Controller
6.1 About the programmable controllers
The PI 6000 and PI 6000-N are programmable PID controllers that you
can configure using InfraWin.
6.2 Operating the PI 6000
To operate the PI 6000, an IMPAC digital pyrometer is required as the transducer. When connected
to the PI 6000, communication with the pyrometer is also via the controller. It can also be accessed
directly (such as Devices/Parameters, Measurement). Baud rate and unit can only be changed by
calling the programming window PI 6000.
6.3 Operating the PI 6000-N
To operate the PI 6000-N, any pyrometer with analog output 0 or 4 to 20 mA as transducer is
required. The pyrometer is connected to the PI 6000-N, but cannot communicate or be
parameterized.
For details, please see the controller's manual.