Owner manual

IS 6 Advanced / IGA 6 Advanced Manual Contents · 5
1 General Information
1.1 Information about the user manual
Congratulations on choosing the high quality and highly efficient IMPAC IS 6 Advanced /
IGA 6 Advanced pyrometer.
This manual provides important information about the instrument and can be used as a work of
reference for installing, operating, and maintaining your IS 6 Advanced / IGA 6 Advanced
pyrometer. It is important that you carefully read the information contained in this manual and
follow all safety procedures before you install or operate the instrument.
To avoid handling errors, keep this manual in a location where it will be readily accessible.
1.1.1 Legend
Note: The note symbol indicates tips and useful information in this manual. All notes
should be read to effectively operate the instrument.
Attention: This sign indicates special information which is necessary for a correct
temperature measurement.
Warnings and Cautions: The general warnings and cautions symbol signifies the
potential for bodily harm or damage to equipment.
MB Shortcut for Temperature range (in German: Messbereich)
1.1.2 Terminology
The terminology used in this manual corresponds to the VDI- / VDE-directives 3511, Part 4.
1.2 Safety
This manual provides important information on safely installing and operating the
IS 6 Advanced / IGA 6 Advanced pyrometer. Several sections of this manual provide safety
warnings to avert danger. These safety warnings are specified with a warning symbol. You must
read and understand the contents of this manual before operating the instrument even if you
have used similar instruments or have already been trained by the manufacturer.
It is also important to continually pay attention to all labels and markings on the instrument and
to keep the labels and markings in a permanent readable condition.
Warning: The pyrometer is only to be used as described in this manual. It is
recommended that you only use accessories provided by the manufacturer.
In addition, signs and markings on the device is to be observed and maintained in legible
condition.
1.3 Limit of liability and warranty
All general information and notes for handling, maintenance and cleaning of this instrument
are offered according to the best of our knowledge and experience.
All Series 6 instruments from LumaSense Technologies have a regionally effective warranty
period. This warranty covers manufacturing defects and faults which arise during operation,
only if they are the result of defects caused by LumaSense Technologies.