Product Manual
Correct (smaller tenon)
Correct (larger tenon)
WRONG
The tenon diameter is variable based on the blade offset. Smaller offset
= smaller tenon, larger offset = larger tenon. 3/16” blade offset is a
good place to start, but you will want to test tenon fit in holes to
achieve the correct offset (we recommend writing the results down).
DO NOT set the blades beyond 5/16” or the blade edge will not contact
the log and will not cut.
1/8”
1/4”
Setting the Blades
Max Log
Capacity
Series
Max Log
Dia.
TTA0750
3.25”
TTA1000
3.50”
TTA1500
4.00”
TTA2000
4.50”
TTA2500
5.00”
TTA3000
5.50”
TAC1000
3.50”
TAC1500
4.00”
TAC2000
4.50”
● Install and secure
the blades with the
Button Head Cap
Screws
● Take care to keep
the blade offset of
both blades equal
(see below)
Cardboard
Spacer
Blade Offset
● The cardboard box that the tool
comes in is about 1/8”
● Remove a piece of box to use as a
quick spacer for blade setting
TIP
5