Owner's Manual

ManualsBrandsLumen Labs ManualsWearable TechnologyLumos Kickstart Helmet

Lumos – A Next Generation Bicycle Helmet

Bicycle Helmet and remote owner’s manual

product name: Lumos Kickstart Helmet

Model number: L1101L

C.P.S.C. 16 CFR Part 1203

United States Federal Safety Standard for Bicycle Helmets

(Consumer Product Safety Commission)

CE, EN1078:2012 +A1:2012

(European Safety Standard)

Patent Pending

This helmet is designed to protect impact cause by collision of head with an obstacle while cycling and roller skating, it has passed EN1078:2012+A1:2012 to show conformity to the EHSR of Regulations

(EU) 2016/425.

EU Type examination conducted by:

Shenzhen Anbotek Compliance Laboratory Limited

product name: Lumos Remote

Model number: LRELRN-AO

IMPORTANT

PLEASE READ CAREFULLY BEFORE USING YOUR NEW HELMET

Protection

The safety Helmet provides excellent durability and integrity.

However, the protective capability may diminish over time due to wear and age.

Warranty

Lumos warrants all products sold by Lumos to be free of defects in material and workmanship for a period of one (1) year from the date of purchase unless otherwise specified on the product. If a

product is found to be defective by Lumos, in its sole discretion, Lumos’s only responsibility will be to replace the defective product. Lumos will not be responsible for any costs, losses or damages

incurred because of the loss or use of any of its products, and Lumos specifically disclaims all claims for consequential and incidental damages.

This limited warranty is subject to several important restrictions:

This limited warranty only applies to products purchased directly from Lumos or from a Lumos Authorized Reseller.

This limited warranty is valid only for the original purchaser of a product, and it cannot be transferred to another person upon the sale, lease, or transfer of the product.

This limited warranty does not cover normal wear and tear.

This limited warranty does not apply to anything other than defects in the manufacturing and workmanship of the product.

The limited warranty is waived if you seek to repair the product using anything other than approved Lumos products and services, or if you seek to combine the product with any third party product (like

sealants, cameras, or custom helmet pads).

If, upon its inspection, Lumos discovers that you have modified, changed, or altered the product in any way, this limited warranty is waived.

Lumos gives no warranty regarding the life of the batteries used in its products. Actual battery life may vary depending on a number of factors, including, but not limited to, the configuration and usage

of a product.

Your use of our products is at your own discretion and risk. You will be solely responsible for (and Lumos disclaims) any and all loss, liability or damages resulting from your use of our products, including

loss of life, personal injury, or the loss of or damage to computer, mobile device, and all other property. Lumos does not guarantee or promise any specific level of performance or battery life associated

with the use of its products or any feature of them.

ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE DURATION OF THE

LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WITH THE EXCEPTION OF ANY

WARRANTIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS AND SIMILAR

OBLIGATIONS OF MANUFACTURER OR SELLER.

User Instructions

Warnings:

For use in non-motorized recreational pedal cycling only. No helmet can prevent against all injuries. Serious injury or death may occur while cycling even with a helmet. Lumos

makes no claim that this helmet will eliminate all possibilities of injury.

Lumos lights are designed to be a supplement and NOT a replacement to regular bike mounted front and back lights. Certain states, cities, and counties have laws that require

cyclists to have bike mounted front and back lights at all times. Please ensure that you are aware of, and comply with your local laws.

Lumos is designed to be a supplement, and NOT a replacement to hand signals. Please continue to give hand signals while cycling on the road. While we designed the “hard brake”

and turn signals to be as recognizable and intuitive as possible, we make no claim that motorists or people around you will recognize what they mean, or that they will see it. Having

lights is good practice, but is no guarantee against preventing an accident or collision.

When activating the turn signal, glance at the remote to ensure that you activated the correct turn signal.

Activating the wrong turn signal or leaving your turn

signal on can be very hazardous and can potentially increase the risk of a collision due to the miscommunication. After completing your turn, also be sure to turn the turn signal off.

This helmet is not designed for motor vehicle use and not for sports other than those for which it was certified. Every time you use this helmet check that nothing is badly torn, worn,

missing, or out of adjustment. This helmet should not be used by children while climbing or doing activities when there is a risk of the child hanging himself or herself. For proper fit,

follow the instructions below.

INSTALLATION Instructions

Attaching the remote mount to your handlebars:

1) Attach the mount to your handlebar using 2 silicone rubber bands. We’ve provided several bands of various sizes to accommodate different handlebar sizes. Ensure that the mount is

securely attached to your handlebar.

2) Place the remote on the mount and twist to lock it in place.

Using the helmet

Turning the helmet on/off + Selecting the flashing mode:

To turn off, press and hold the power button

To change the flashing mode, press the power button for a short press

charging the helmet and remote

Note that when the battery on the helmet is low, the power button will start flashing red. At this point there is only approximately 30min of charge left in the helmet. When the battery

on the helmet is critically low and is about to shut off, before it does so the helmet will beep several times to inform you that it is about to shut off. (in case you are riding with it at the

time)

Summary of content (3 pages)

PAGE 1
Lumos – A Next Generation Bicycle Helmet Bicycle Helmet and remote owner’s manual product name: Lumos Kickstart Helmet Model number: L1101L C.P.S.C.
PAGE 2
When the battery on the remote is low, both buttons on the remote will flash red. Please recharge the remote immediately. The remote uses the same charging cable as the helmet. Pairing the helmet with the remote If the helmet is not responding to the remote, either you need to charge the remote, or the remote is not paired with the helmet. To pair the remote to the helmet, follow these steps: 1) Turn your helmet off. Then press and hold the power button till you hear a beep.
PAGE 3
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.