User's Manual

English - 27
menu.
2. Press [], [], [], or [] to select [Setting].
3. Press [ENTER] key to enter.
4. Press [] or [] to the [Capture Settings] menu.
5. Press [] to find [Image Quality].
6. Press [] or [] to select among [High/Medium/Low].
7. Press [Menu] to exit.
7.11.3 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [], [], [], or [] to select [Setting].
3. Press [ENTER] key to enter.
4. Press [] or [] to the [Capture Settings] menu.
5. Press [] to the [Capture Mode].
6. Press [] or [] to select [Timer].
7. Press [] to find [Capture Time]; Press [] or [] to set capture time.
8. Press [] to find [Capture Interval]; Press [] or [] to set interval time.
9. Press [MENU] to exit.
7.12 I would like to record videos
<Remark> You may not record videos until a SD card is inserted.
7.12.1 Recording motion images
<Remark> You may not be able to capture or record images when
[Capture Mode] is set to [Disable].
Remote control:
1. Press [RECORD] on the remote control to start recording videos.
2. Record sounds with the built-in microphone of the control panel.
3. Press [RECORD] again to stop recording.
Control panel:
1. Press and hold [CAPTURE] for about 2 seconds to start recording videos.
2. Press [CAPTURE] again to stop recording.